GCAM v6 Documentation: Inputs for Modeling Supply

Documentation for GCAM
The Global Change Analysis Model

View the Project on GitHub JGCRI/gcam-doc


Inputs for Modeling Supply

GCAM’s supply inputs include information on production, prices, technology cost and performance, and other emissions in the historical period in order to calibrate model parameters. In addition, GCAM’s supply modeling requires information on future technology cost and performance and emissions factors for future periods. GCAM requires that supply data is globally consistent with demand data for each of its historical model periods as it solves for market equilibrium in these years as it does for future years. These inputs are required for each region and historical year.

Table of Contents

External Inputs

Energy

Description

Table 1: External inputs used for supply of energy1

Name Description Type Source Resolution Unit
Historical supply of energy Supply of energy in the historical period; used for initialization/calibration of GCAM External data IEA Specified by fuel, transformation sector, country, and year ktoe and GWh
CO2 capture rates Fraction of CO2 captured in CCS technologies. Assumption   Specified by technology and year unitless
Retirement rules For vintaged technologies, GCAM requires the user to specify the lifetime, and the parameters required for phased and profit-based shutdown. Assumption   Specified by technology and year Years (for lifetime), unitless for others
Logit exponents GCAM requires the user to specify the logit exponents that determine the substitutability between technologies. Assumption   Specified by sector and subsector N/A
Share weight interpolation rules These rules dictate how share weights (GCAM’s calibration parameter) are specified in future years. Assumption   Specified by subsector and technology N/A
Cost of conversion technologies Cost of production for conversion technologies External data Various Specified by technology and year 1975$/GJ
Capital cost Overnight capital cost of electricity generation technologies External data Annual Technology Baseline (ATB) 2019 Specified by technology and year 1975$/kW
Fixed O&M costs Fixed operating and maintenance (O&M) costs for electricity generation technologies External data Annual Technology Baseline (ATB) 2019 Specified by technology and year 1975$/kW/yr
Variable O&M costs Variable operating and maintenance (O&M) costs for electricity generation technologies External data Annual Technology Baseline (ATB) 2019 Specified by technology and year 1975$/MWh
Capacity factor Ratio of generation to capacity for electricity generation technologies Assumption   Specified by technology and year Unitless
Fixed charge rate Factor used to levelize capital cost Assumption   Specified by technology Unitless
Default efficiencies Default amount of output produced per unit of input; can be overwritten by region-specific information derived from historical data Assumption   Specified by technology and year GJ per GJ
Default input-output coefficients Default amount of input required per unit of output produced; can be overwritten by region-specific information derived from historical data Assumption   Specified by technology and year GJ per GJ
Resource supply curves Mapping between cost and resource extraction. Resource extraction is cumulative for deplatable resources and annual for renewable resources External data Various Specified by resource and year EJ for extraction, 1975$/GJ for cost
Historical non-CO2 emissions Historical emissions of non-CO2 External data CEDS v_2021_04_21 Specified by country, technology, gas, and year Various
CO2 emissions coefficients Default carbon content of fuels External data CDIAC and IEA Specified by fuel kgC / GJ
Historical CO2 emissions Historical emissions of CO2 External data CDIAC Specified by nation and year ktC per year
1: Note that this table differs from the one provided on the Energy Supply Modeling Page in that it only lists external inputs to the supply module (either data sources or assumptions). Additionally, the units listed are the units of the raw inputs, rather than the units the GCAM requires.


Note that for the Shared Socioeconomic Pathways (SSPs), different inputs are used for some variables. See SSPs for more information.

Data

Throughout GCAM, the number in the name of assumption file indicates to which sector the file applies. Files with A10 through A20 in the name are assumptions for resources. Files with A21 and A22 in the name are assumptions for refining and gas processing. Files with A23 in the name are assumptions for electricity, A24 is for heat, and A25 is for hydrogen. Files with A26 in the name are assumptions for transmission and distribution. Files with A61 in the name are assumptions about carbon storage.

Historical supply of energy

GCAM uses IEA energy balances as a source for historical energy supply and demand. IEA data are proprietary and thus are not provided in the GCAM data repository. Instead, we provide all of the R code used to process the IEA data so that the user can replicate the processing if they purchase the IEA data. In addition, we provide aggregated data after it has undergone processing so that GCAM input files can be created and used by the user community.

CO2 capture rates

CO2 capture rates for refining are specified in A22.globaltech_co2capture.csv. Capture rates for electricity generation are specified in A23.globaltech_co2capture.csv; capture rates for hydrogen production are specified in A25.globaltech_co2capture.csv.

Retirement rules

Retirement rules are specified in A22.globaltech_retirement.csv, A23.globaltech_retirement.csv, A25.globaltech_retirement.csv, and A10.ResSubresourceProdLifetime.csv.

Logit exponents

Logit exponents are specified in A21.sector.csv, A21.subsector_logit.csv, A22.sector.csv, A22.subsector_logit.csv, A23.sector.csv, A23.subsector_logit.csv, A24.sector.csv, A24.subsector_logit.csv, A25.sector.csv, A25.subsector_logit.csv, A26.sector.csv, A26.subsector_logit.csv, A61.subsector_logit.csv, A_ff_RegionalSector.csv, and A_ff_RegionalSubsector.csv, and A_ff_TradedSector.csv.

Share weight interpolation rules

Share weight interpolation rules are specified in A21.subsector_shrwt.csv, A21.subsector_interp.csv, A21.tradedtech_shrwt.csv, A21.globaltech_shrwt.csv, and A21.globaltech_interp.csv. Similar files are defined for other sectors. For each sector, the file that ends _interp specifies the rule (e.g., fixed, linear) and the file that ends _shrwt indicates the value to interpolate to (if needed). Files that include subsector in the name define share weights at the subsector level, while globaltech, tradedtech, and globaltranTech indicate share weight information at the technology level.

Costs

Costs of conversion technologies are specified in A21.globaltech_cost.csv, A22.globaltech_cost.csv, A24.globaltech_cost.csv, A25.globaltech_cost.csv,
A26.globaltech_cost.csv, A21.globalrsrctech_cost.csv, and A61.globaltech_cost.csv.

For electricity generation technologies, costs inputs are specified in capital cost, fixed operating & maintenance costs, and variable operating & maintenance cost.

Default efficiencies

Efficiencies are specified in A23.globaltech_eff.csv, A25.globaltech_eff.csv, and A26.globaltech_eff.csv.

Default input-output coefficients

Coefficients are specified in A21.globaltech_coef.csv, A22.globaltech_coef.csv, A24.globaltech_coef.csv, A25.globaltech_coef.csv, A21.globalrsrctech_coef.csv, and A61.globaltech_coef.csv.

Resource supply curves

Resource supply curves are specified for fossil fuels, uranium, rooftop PV, EGS, geothermal, municipal solid waste , traditional biomass, onshore wind and offshore wind.

Emissions

Default carbon contents of fuels are specified in A_PrimaryFuelCCoef.csv. Historical CO2 emissions are provided in CDIAC_CO2_by_nation.csv.

Historical non-CO2 emissions information is provided in the GCAM release as “pre-built” data aggregated to GCAM regions, technologies, and fuels. Users that want to build using CEDS raw data, for example to build for different regional aggregations, will need to generate CEDS data using the open-source CEDS system and place the resulting emissions data by country, fuel, and sector within the CEDS folder.

Water

Description

Table 2: External inputs used for supply of water 2

Name Description Type Source Resolution Unit
Surface water supply curves (cost and availability) Xanthos derived total maximum runoff values, combined with accessible water calculation to determine water available at very low price and the level of accessible water for cost-curve inflection Exogenous Data Xanthos output Water basin and year \(km^3\) available per USD
Groundwater supply curves (cost and availability) Amount of groundwater available in each basin at increasingly high graded levels Turner et al., 2019a Water basin and year \(km^3\) available per USD  
Desalination cost Cost of desalinated water within a basin which is available at high cost and available once the price of water within a basin surpasses a certain threshold Exogenous Data Global Constant USD per \(km^3\)  
2: Note that this table differs from the one provided on the Water Supply Modeling Page in that it only lists external inputs to the supply module (either data sources or assumptions). Additionally, the units listed are the units of the raw inputs, rather than the units the GCAM requires.


Note that for the Shared Socioeconomic Pathways (SSPs), different inputs are used for some variables. See SSPs for more information.

Data

Surface water supply curves

Surface water supply curves are based on runoff estimates from Xanthos, a detailed global hydrology model (Liu et al. 2018; Vernon et al. 2019). Xanthos accounts for surface and subsurface processes to compute runoff at 0.5° grid resolution. Global climate datasets are utilized in conjunction with Xanthos to determine historical annual average runoff aggregated for each basin (Liu et al. 2018; Turner et al., 2019a; Vernon et al. 2019). Of the total basin runoff, water available or accessible for human use takes into consideration requirements for ecosystem services, inaccessibility due to rapid flow and remote locations, and capacity of reservoir storage. Accessible fractions of total runoff vary across basins. Renewable water volumes up to the accessible fraction is available at nominal or low cost. Additional renewable water beyond the accessible fraction is available at a sharply higher cost to ensure availability of water for ecosystem services and to reflect capital investments necessary for reservoir expansion. Basin level runoff is specified in xanthos_basin_runoff.csv. Accessible fraction is specified in xanthos_accessible_water.csv. For additional accessible calculations, basin historical basin level demands are specified in basin_water_demand_1990_2015.csv and groundwater availability is specified in groundwater_trend_watergap.csv.

Groundwater supply curves

Non-renewable groundwater supply curves are modeled as a graded depletable resource with a fixed amount of total groundwater availability. Basin level estimates of environmentally exploitable groundwater are aggregated from grid-scale data. Groundwater supply curves represent the relationship between exploitable groundwater and cost of extraction. As the available water within the initial grades is exhausted, the price for additional groundwater resources increases as a function of depth and geological complexity. Energy inputs and costs required for pumping are included for a rigorous estimate of the relationship between groundwater volume and extraction cost (Turner et al., 2019a; Kim et al. 2016). Graded groundwater availability is specified in groundwater_constrained.csv with groundwater extraction trends found in groundwater_trend_watergap.csv and groundwater_trend_gleeson.csv.

Desalination costs

The costs of desalinated water reflects electrical energy input and capital and operational costs. Due to the high cost of desalination, desalinated water is only utilized when renewable and non-renewable water supplies are scarce and the cost of freshwater is high. Desalinated water representation is nested within the water distribution sectors where it competes with basin water supply from renewable and nonrenewable sources.

Food, Feed, and Forestry

Description

Table 3: External inputs used for supply of food, feed, and forestry 3

Name Description Type Source Resolution Unit
Historical country-level production of crops Production of agricultural commodities by country in the historical period; used for initialization/calibration of GCAM External data FAO Specified by crop, country, and year tons
Historical country-level harvested area for crops Harvested area for agricultural commodities by country in the historical period; used for initialization/calibration of GCAM External data FAO Specified by crop, use, country, and year ha
Historical sub-national production of crops Production of agricultural commodities by water basin in a single year; used for initialization/calibration of GCAM External data moirai Specified by crop, country and basin tons
Historical sub-national harvested area of crops Harvested area of agricultural commodities by water basin in a single year; used for initialization/calibration of GCAM External data moirai Specified by crop, country and basin ha
Historical production of livestock Production of livestock commodities in the historical period; used for initialization/calibration of GCAM External data FAO Specified by crop, use, country, and year tons
Feed fractions for livestock Fraction of feed by type External data IMAGE Specified by commodity, feed system, feed type, IMAGE region and year (1970-2030) unitless
Livestock feed I-O coefficients Amount of input per unit of output for livestock feed systems External data IMAGE Specified by commodity, feed system, IMAGE region and year (1970-2030) Dry feed to animal commodity ratio
Historical cost of production Historical cost of crop production in the USA External data USDA Specified by crop, type of cost, and year various (e.g., $ per planted acre, $ per bushel)
Historical prices Historical prices of agriculture and livestock commodities; used for initialization/calibration of GCAM External data FAO Specified by country, commodity, and year  
Agriculture productivity growth Projected yields through 2050 for agricultural commodities External data FAO Specified by country, commodity, and year  
Logit exponents Share parameters dictating substitution between different feed options for livestock Assumption   Specified by type of livestock unitless
Historical non-CO2 emissions Historical emissions of non-CO2 External data CEDS v_2021_04_21 Specified by country, technology, gas, and year Various
3: Note that this table differs from the one provided on the Land Supply Modeling Page in that it only lists external inputs to the supply module (either data sources or assumptions). Additionally, the units listed are the units of the raw inputs, rather than the units the GCAM requires.


Note that for the Shared Socioeconomic Pathways (SSPs), different inputs are used for some variables. See SSPs for more information.

Data

Historical production and harvested area

For both production and harvested area of crops, GCAM blends country level time series provided by the FAO with subnational information provided by moirai in a single year to determine historical production and harvested area for each GCAM land region. FAO data is specified in FAO_ag_Prod_t_PRODSTAT.csv and FAO_ag_HA_ha_PRODSTAT.csv. Moirai data is specified in LDS_ag_prod_t.csv and LDS_ag_HA_ha.csv. Livestock production is specified in FAO_an_Prod_t_PRODSTAT.csv.

Livestock feed information

GCAM bases its historical livestock feed representation on the IMAGE model. GCAM requires information on input-output coefficients, feed fractions, and production mixes.

Ag productivity growth

GCAM captures change in yield due to increases in fertilizer use or irrigation endogenously. All other non-climate related factors driving yield increases are exogenously specified, with data specified in FAO_ag_CROSIT.csv.

Prices

GCAM uses producer prices to initialize the model (future prices are endogenous). Those prices are provide in FAO_ag_an_ProducerPrice.csv.gz.

Cost of production

The costs associated with land, irrigation, and fertilizer are endogenously determined in GCAM (see Land Supply). Other costs of production are exogenously specified and the data used for those costs can be found in USDA_cost_data.csv, with USDA_item_cost.csv specifying which costs are included in GCAM. Note that we use cost information for the USA in all regions.

Emissions

Historical non-CO2 emissions information is provided in the GCAM release as “pre-built” data aggregated to GCAM regions, technologies, and fuels. Users that want to build using CEDS raw data, for example to build for different regional aggregations, will need to generate CEDS data using the open-source CEDS system and place the resulting emissions data by country, fuel, and sector within the CEDS folder.

References

[CDIAC 2017] Boden, T., and Andres, B. 2017, National CO2 Emissions from Fossil-Fuel Burning, Cement Manufacture, and Gas Flaring: 1751-2014, Carbon Dioxide Information Analysis Center, Oak Ridge National Laboratory. Link

[IEA 2019] International Energy Agency, 2019, Energy Balances of OECD Countries 1960-2017 and Energy Balances of Non-OECD Countries 1971-2017, International Energy Agency, Paris, France.

[Kim et al. 2016] Kim SK, Hejazi M, et al. (2016). Balancing global water availability and use at basin scale in an integrated assessment model. Climatic Change 136:217-231. Link

[Kyle et al. 2021] Kyle, P., Hejazi, M., Kim, S., Patel, P., Graham, N., & Liu, Y. (2021). Assessing the future of global energy-for-water. Environmental Research Letters, 16(2), 024031.

[Liu et al. 2018] Liu Y., M. Hejazi, H. Li, X. Zhang, G. Leng (2018). A hydrological emulator for global applications - HE v1.0.0. Geoscientific Model Development. Link

[Turner et al. 2019a] Turner S.W.D., M. Hejazi, C. Yonkofski, S. Kim, P. Kyle (2019a). Influence of groundwater extraction costs and resource depletion limits on simulated global nonrenewable water withdrawals over the 21st century. Earth’s Future (2019), 10.1029/2018EF001105 Link

[Vernon 2019] Vernon, C., M. Hejazi, S. Turner, Y. Liu, C. Braun, X. Li, and R. Link. A Global Hydrologic Framework to Accelerate Scientific Discovery. Journal of Open Research Software (2019). Link